Safety Requirements; Product Labeling - Intermec EasyCoder E4 User Manual

Chapter 1 Introduction
Safety

Product Labeling

6
Intermec assumes no responsibility regarding the CE Directive if
the printer is handled, modifi ed, or installed in any way other
than that described in Intermec's manuals.
Caution
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side door is open, so
ensure that the door is closed before you operate the printer.
• Do not put your fi ngers inside the print mechanism when
the power is on.
• Place the printer on an even surface which can support its
weight of approximately 4.7 kg (10.3 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose
to clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using
a cleaning card.
• Do not transport the printer wihout fi rst removing any sup-
plies.
The machine label is attached to the bottom of the printer and
contains information on type, model, and serial number as well
as AC voltage. It also contains various signs of approval.
Intermec EasyCoder E4 – User's Guide