Safety Requirements; Product Labelling - Intermec EasyCoder E4 Installation & Operation Manual

Safety
Requirements

Product Labelling

Intermec EasyCoder E4 LinerLess – Installation & Operation Ed. 1
Intermec assumes no responsibility as regards fulfilling the CE Di-
rective if the printer is handled, modified or installed in any way
other than that described in the manuals.
Caution:
Moving parts are exposed when the side and front covers are open,
so ensure that the covers are closed before you operate the printer.
The machine sign is attached to the bottom of the printer and con-
tains information on type, model and serial number as well as volt-
age and signs of approval.
Model #
1-301020-11
Serial #
00021
This equipment complies with the requirements for a Class A computing device in FCC Rules
Part 15 Subpart J. Operation of this device in a residential area may cause harmful interference
requiring the user to take whatever steps may be necessary to correct the interference.
EasyCoder E4
110-120/220-240V 4/2A 60/50Hz
INTERMEC PRINTER AB, SWEDEN
Chapter 1 Introduction
MADE IN SWEDEN
5