D-Link xStack DGS-3420 Series Reference Manual page 998
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
# STACK
config stacking force_master_role state disable
# DEVICE
config temperature threshold high 79
config temperature threshold low 11
config temperature trap state enable
config temperature log state enable
CTRL+C ESC q
Quit
29-12 show boot_file
Description
This command is used to display the configuration file and firmware image assigned as boot up files.
Format
show boot_file
Parameters
None.
Restrictions
None.
Example
To display the configuration file and firmware image assigned as a boot up file:
DGS-3420-28SC:admin#show boot_file
Command: show boot_file
Bootup Firmware
Bootup Configuration
DGS-3420-28SC:admin#
SPACE n
Next Page
ENTER
: c:/runtime.had
: c:/config.cfg
Next Entry
a
All
993
Advertisement
Table of Contents
