D-Link xStack DGS-3420 Series Reference Manual page 1017

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
show vrrp {ipif <ipif_name 12> {vrid <vrid 1-255>}}
Parameters
ipif - (Optional) Specify the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name to be displayed here. This name can be up to 12
characters long.
vrid - (Optional) Specify the Virtual Router ID to be displayed.
<vrid 1-255> - Enter the Virtual Router ID to be displayed here. This value must be between 1
and 255.
If no parameter is specified, then all the VRRP entries will be displayed.
Restrictions
None.
Example
To display the VRRP configuration:
DGS-3420-28SC:admin#show vrrp
Command: show vrrp
Global VRRP
Non-owner Response Ping: Disabled
Interface Name
Authentication type
Authentication Data
VRID
Virtual IP Address
Virtual MAC Address
Virtual Router State
State
Priority
Master IP Address
Critical IP Address
Checking Critical IP
Advertisement Interval : 1 Sec(s)
Preempt Mode
Virtual Router Up Time : 3152082 centi-secs
Total Entries: 1
DGS-3420-28SC:admin#
: Enabled
: System
: Simple Text Password
: 12345678
: 1
: 10.90.90.91
: 00-00-5E-00-01-01
: Master
: Enabled
: 100
: 10.90.90.90
: 0.0.0.0
: Disabled
: True
1012