D-Link xStack DGS-3420 Series Reference Manual page 1020

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<int 0-7> - Specify the priority of the voice VLAN. The range is 0 to 7. The default priority is 5.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the priority of the voice VLAN to be six:
DGS-3420-28SC:admin#config voice_vlan priority 6
Command: config voice_vlan priority 6
Success.
DGS-3420-28SC:admin#
31-4 config voice_vlan oui
Description
This command is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the
voice traffic. There are a number of pre-defined OUIs. The user can further define the user-defined
OUIs if needed. The user-defined OUI cannot be the same as the pre-defined OUI. The following are
the pre-defined voice traffic's OUI:
OUI
00:E0:BB
00:03:6B
00:E0:75
00:D0:1E
00:01:E3
00:60:B9
00:0F:E2
00:09:6E
Format
config voice_vlan oui [add | delete] <macaddr> <macmask> {description <desc 32>}
Parameters
add - Specify to add a user-defined OUI of Voice device vendor.
Vendor
3COM
Cisco
Veritel
Pingtel
Siemens
NEC/ Philips
Huawei-3COM
Avaya
1015
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
nec&philips
huawei&3com
avaya