D-Link DGS-3000 Series Reference Manual page 263

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
DGS-3000-26TC:admin#show fdb
Command: show fdb
Unicast MAC Address Aging Time
VID VLAN Name
---- -------------------------------- ----------------- ----- ------- -------
1 default
1 default
1 default
1 default
1 default
Total Entries: 5
DGS-3000-26TC:admin#
To display the security FDB table:
DGS-3000-26TC:admin#show fdb security
Command: show fdb security
VID MAC Address
---- ----------------
1 00-00-00-10-00-01
1 00-00-00-10-00-02
1 00-00-00-10-00-04
1 00-00-00-10-00-0A
1 00-00-00-10-00-06
Total Entries: 5
DGS-3000-26TC:admin#
30-11 show multicast vlan_filtering_mode
Description
This command is used to show the multicast packet filtering mode for VLANs.
Note: A product supports the multicast VLAN filtering mode could not support the port filtering
mode at the same time.
Format
show multicast vlan_filtering_mode {[ vlanid < vidlist> | vlan <vlan_name 32>]}
Parameters
vlanid - (Optional) Specifies a list of VLANs to be configured.
<vidlist> - Enter the VLAN ID list here.
vlan - (Optional) Specifies the name of the VLAN. The maximum name length is 32.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
= 300
MAC Address
00-01-02-03-04-00 CPU
00-23-7D-BC-08-44 1
00-23-7D-BC-2E-18 1
00-26-5A-AE-CA-1C 1
60-33-4B-C4-52-1A 1
Port Type Status
----- ------- -------- ---------------
1 Dynamic Drop
2 Static Forward
4 Static Forward
5 Static Forward
6 Dynamic Drop
259
Port Type
Self
Dynamic Forward
Dynamic Forward
Dynamic Forward
Dynamic Forward
Security Module
802.1X
WAC
Port Security
MAC-based Access Control
Compound Authentication
Status
Forward