D-Link DGS-3000 Series Reference Manual page 277

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
DGS-3000-26TC:admin#config gratuitous_arp send periodically ipif System
interval 5
Command: config gratuitous_arp send periodically ipif System interval 5
Success.
DGS-3000-26TC:admin#
32-5 enable gratuitous_arp
Description
The command is used to enable gratuitous ARP trap and log state. The switch can trap and log the
IP conflict event to inform the administrator. By default, trap is disabled and event log is enabled.
Format
enable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
Parameters
ipif - (Optional) Specifies the interface name of L3 interface
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
trap - Specifies to enable the trap function.
log - Specifies to enable the log function.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable system interface's gratuitous ARP log and trap:
DGS-3000-26TC:admin#enable gratuitous_arp ipif System trap log
Command: enable gratuitous_arp ipif System trap log
Success.
DGS-3000-26TC:admin#
32-6 disable gratuitous_arp
Description
The command is used to disable gratuitous ARP trap and log state. The switch can trap and log
the IP conflict event to inform the administrator. By default, trap is disabled and event log is
enabled.
Format
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
273