D-Link DGS-3000 Series Reference Manual page 174

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
None.
Example
To show the configuration of the "all MPs reply LTRs" function:
DGS-3000-26TC:admin#show cfm mp_ltr_all
Command: show cfm mp_ltr_all
All MPs reply LTRs: Disabled
DGS-3000-26TC:admin#
16-24 show cfm remote_mep
Description
This command is used to show remote MEPs.
Format
show cfm remote_mep [mepname <string 32> | md [<string 22> | md_index <uint 1-
4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>] mepid <int 1-8191>]
remote_mepid <int 1-8191>
Parameters
mepname - Specifies the MEP name used.
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
md Specifies the maintenance domain name.
<string 22> - Enter the maintenance domain name here. This name can be up to 22
characters long.
md_index - Specifies the maintenance domain index.
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must
between 1 and 4294967295.
ma Specifies the maintenance association name.
<string 22> - Enter the maintenance association name here. This name can be up to 22
characters long.
ma_index - Specifies the maintenance association index.
<uint 1-4294967295> - Enter the maintenance association index value here. This value
must between 1 and 4294967295.
mepid - Specifies the MEP ID used.
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
remote_mepid - Specifies the Remote MEP ID used.
<int 1-8191> - Enter the remote MEP ID used here. This value must be between 1 and 8191.
Restrictions
None.
170