D-Link DGS-3000 Series Reference Manual page 136

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
DGS-3000-26TC:admin#enable bpdu_protection
Commands: enable bpdu_protection
Success.
DGS-3000-26TC:admin#
11-5 disable bpdu_protection
Description
This command is used to disable BPDU protection function globally for the Switch.
Format
disable bpdu_protection
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable bpdu_protection function globally for the entire switch:
DGS-3000-26TC:admin#disable bpdu_protection
Commands: disable bpdu_protection
Success.
DGS-3000-26TC:admin#
11-6 show bpdu_protection
Description
This command is used to display BPDU protection global configuration or per port configuration
and current status.
Format
show bpdu_protection {ports {<portlist>}}
Parameters
ports - Specifies a range of ports to be configured.
<portlist> - Enter the portlist here.
132