D-Link DGS-3000 Series Reference Manual page 312

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure an IMPB entry:
DGS-3000-26TC:admin#config address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3000-26TC:admin#
34-8 show address_binding
Description
This command is used to display the IMPB global settings or IMPB settings on specified ports.
Format
show address_binding {ports {<portlist>}}
Parameters
ports - (Optional) Specifies the ports for which the information is displayed. If not specified, all
ports are displayed.
<portlist> - (Optional) Enter the list of ports used here.
Restrictions
None.
Example
To show the IMPB global configuration:
308