D-Link DGS-3000 Series Reference Manual page 237

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
DGS-3000-26TC:admin#show dos_prevention
Command: show dos_prevention
Trap:Disabled Log:Disabled
DoS Type
--------------------------
Land Attack
Blat Attack
TCP Null Scan
TCP Xmas Scan
TCP SYNFIN
TCP SYN SrcPort Less 1024
Ping of Death Attack
TCP Tiny Fragment Attack
CTRL+C ESC q Quit
25-3 config dos_prevention trap
Description
This command is used to enable or disable DoS prevention trap state.
Format
config dos_prevention trap [enable | disable]
Parameters
enable - Enables DoS prevetion trap state.
disable - Disables DoS prevention trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable DoS prevention trap:
DGS-3000-26TC:admin#config dos_prevention trap disable
Command: config dos_prevention trap disable
Success.
DGS-3000-26TC:admin#
Function Version
State
--------
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
SPACE n Next Page p
: 1.01
Action
----------------
Drop
Drop
Drop
Drop
Drop
Drop
Drop
Drop
Previous Page r Refresh
233
Frame Counts
------------
-
-
-
-
-
-
-
-