D-Link DGS-3000 Series Reference Manual page 394

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display LLDP-MED information currently available for populating outbound LLDP-MED
advertisements for port 1:
DGS-3000-26TC:admin#show lldp_med local_ports 1
Command: show lldp_med local_ports 1
Port ID
-----------------------------------------------------------------
LLDP-MED Capabilities Support:
Capabilities
Network Policy
Location Identification
Extended Power Via MDI PSE :Not Support
Extended Power Via MDI PD
Inventory
Network Policy:
None
Extended Power Via MDI:
None
DGS-3000-26TC:admin#
41-21 show lldp_med remote_ports
Description
This command is used to display LLDP-MED information learned from neighbors.
Format
show lldp_med remote_ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies a range of ports to be displayed.
Restrictions
None.
Example
To display remote entry information:
: 1
:Support
:Support
:Not Support
:Not Support
:Support
390