D-Link DGS-3000 Series Reference Manual page 53

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To re-authenticate the device connected to the port:
DGS-3000-26TC:admin#config 802.1x reauth port_based ports all
Command: config 802.1x reauth port_based ports all
Success.
DGS-3000-26TC:admin#
4-17 create 802.1x guest_vlan
Description
This command is used to assign a static VLAN to be guest VLAN. The specific VLAN which
assigned to guest VLAN must be existed. The specific VLAN which assigned to guest VLAN can't
be deleting.
Format
create 802.1x guest_vlan <vlan_name 32>
Parameters
<vlan_name 32> - Specifies the VLAN to be guest VLAN. The VLAN name can be up to 32
characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a VLAN named "guestVLAN" as 802.1X guest VLAN:
DGS-3000-26TC:admin#create 802.1x guest_vlan guestVLAN
Command: create 802.1x guest_vlan guestVLAN
Success.
DGS-3000-26TC:admin#
4-18 delete 802.1x guest_vlan
Description
This command is used to delete guest VLAN setting, but not delete the static VLAN. All ports
which enabled guest VLAN will remove to original VLAN after deleted guest VLAN.
49