D-Link DGS-3000 Series Reference Manual page 243

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Parameters
raps_vlan - Specifies the VLAN which will be the R-APS VLAN.
<vlanid> - Enter the VLAN ID used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an R-APS VLAN:
DGS-3000-26TC:admin#create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
DGS-3000-26TC:admin#
27-4 delete erps raps_vlan
Description
This command is used to delete an R-APS VLAN on a switch. When an R-APS VLAN is deleted,
all parameters related to this R-APS VLAN will also be deleted. This command can only be issued
when the ring is not active.
Format
delete erps raps_vlan <vlanid>
Parameters
raps_vlan - Specifies the VLAN which will be the R-APS VLAN.
<vlanid> - Enter the VLAN ID used here.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an R-APS VLAN:
DGS-3000-26TC:admin#delete erps raps_vlan 4094
Command: delete erps raps_vlan 4094
Success.
DGS-3000-26TC:admin#
239