D-Link DGS-3000 Series Reference Manual page 25

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Parameters
ports - Specifies a range of ports to be displayed.
<portlist> - (Optional) Enter the list of ports to be configured.
description - (Optional) Indicates if the port description will be included in the display.
err_disabled - (Optional) Displays ports that were disabled because of an error condidtion.
details - (Optional) Displays the port details.
media_type - (Optional) Displays the port transceiver type.
Restrictions
None.
Example
To display the port details:
DGS-3000-26TC:admin#show ports details
Command: show ports details
Port : 1
--------------------
Port Status
Description
HardWare Type
MAC Address
Bandwidth
Auto-Negotiation
Duplex Mode
Flow Control
MDI
Address Learning
Last Clear of Counter
BPDU Hardware Filtering Mode: Disabled
Queuing Strategy
TX Load
RX Load
CTRL+C ESC q Quit SPACE n
: Link Up
:
: Fast Ethernet
: 00-01-02-03-04-01
: 100000Kbit
: Enabled
: Full Duplex
: Disabled
: Normal
: Enabled
: 2 hours 43 mins ago
: FIFO
: 0/100,
: 0/100,
Next Page p Previous Page
21
0 bits/sec,
0 bits/sec,
r Refresh
0 packets/sec
0 packets/sec