D-Link DGS-3000 Series Reference Manual page 653

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Parameters
index - (Optional) Specifies the list of index numbers of the entries that need to be displayed. For
example, the index 1-5 will display the attack log messages from 1 to 5.
<value_list> - Enter the index numbers of the entries that needs to be displayed here.
If no parameter is specified, all entries in the attack log will be displayed.
Restrictions
None.
Example
To show dangerous messages on the master:
DGS-3000-26TC:admin#show attack_log index 1
Command: show attack_log index 1
Index Date
----- ---------- -------- -------- ---------------------------------------------
1 2008-10-17 15:00:14 CRIT(2)
DGS-3000-26TC:admin#
72-14 clear attack_log
Description
This command is used to clear the attack log.
Format
clear attack_log
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear the master's attack log:
DGS-3000-26TC:admin#clear attack_log
Command: clear attack_log
Success.
DGS-3000-26TC:admin#
Time Level
Possible spoofing attack from IP: , MAC:
0A-00-00-5A-00-01, port: 3
Log Text
649