D-Link DGS-3000 Series Reference Manual page 661

Layer 2 managed gigabit switch
Hide thumbs Also See for DGS-3000 Series:
Table of Contents

Advertisement

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
attack_log_toTFTP – Specifies that the attack log will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
<domain_name 255> - (Optional) The domain name of the TFTP server.
dest_file - Specifies the destination file path name.
<path_filename 64> - Specifies the path name on the TFTP server to hold the attack log.
This name can be up to 64 characters long.
firmware_toTFTP – Specifies that the firmware file will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
<domain_name 255> - (Optional) The domain name of the TFTP server.
dest_file - Specifies the destination file path name.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
src_file - (Optional) Specifies the source file path name.
<pathname 64> - The pathname specifies an absolute pathname on the device file
system. If pathname is not specified, it refers to the boot_up image. This name can be
up to 64 characters long.
cfg_toFTP – Specifies that the configuration file will be uploaded to the FTP server.
<ipaddr> - The IP address of the FTP server.
tcp_port - Specifies the TCP port.
<tcp_port_number1-65535> - Enter a value between 1 and 65535.
dest_file - Specifies the destination file path name.
<path_filename 64> - The pathname specifies the pathname on the FTP server. It can be
a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
ftp: - Specifies the FTP site.
<string user:password@ipaddr:tcpport/path_filename> - Enter the FTP directory.
src_file - (Optional) Specifies the source file path name.
<pathname 64> - The pathname specifies an absolute pathname on the device file
system. If pathname is not specified, it refers to the boot_up CFG file.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
657

Advertisement

Table of Contents
loading

Table of Contents