D-Link DGS-3000 Series Reference Manual page 441

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
47-10 show mld_snooping mrouter_ports
Description
This command is used to display the currently configured router ports on the Switch.
Format
show mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all] {[static
| dynamic | forbidden]}
Parameters
vlan - Specifies the name of the VLAN on which the router port resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specifies the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
all - Specifies all VLANs on which the router port resides.
static - (Optional) Displays router ports that have been statically configured.
dynamic - (Optional) Displays router ports that have been dynamically configured.
forbidden - (Optional) Displays forbidden router ports that have been statically configured.
If no parameter is specified, the system will display all currently configured router ports on the
Switch.
Restrictions
None.
Example
To display the mld_snooping mrouter ports:
DGS-3000-26TC:admin#show mld_snooping mrouter_ports vlan default
Command: show mld_snooping mrouter_ports vlan default
VLAN Name
Static Router Port
Dynamic Router Port
Router IP
Forbidden Router Port
Total Entries: 1
DGS-3000-26TC:admin#
47-11 create mld_snooping static_group
Description
This command is used to create an MLD snooping static group. Member ports can be added to the
static group. The static member and the dynamic member ports form the member ports of a group.
: default
: 1-10
:
:
: 11
437