D-Link DGS-3000 Series Reference Manual page 339

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Format
show jwac
Parameters
None.
Restrictions
None.
Example
To display the current JWAC configuration:
DGS-3000-26TC:admin#show jwac
Command: show jwac
State
Enabled Ports
Virtual IP/URL
Switch HTTP Port
UDP Filtering
Forcible Logout
Redirect State
Redirect Delay Time
Redirect Destination
Quarantine Server
Q-Server Monitor
Q-Server Error Timeout
RADIUS Auth-Protocol
RADIUS Authorization
Local Authorization
DGS-3000-26TC:admin#
37-5 enable jwac redirect
Description
This command is used to enable JWAC redirect. When redirect quarantine_server is enabled,
the unauthenticated host will be redirected to a quarantine server when it tries to access a random
URL. When redirect jwac_login_page is enabled, the unauthenticated host will be redirected to
the jwac_login_page on the Switch to finish authentication.
When enable redirect to quarantine server is in effect, a quarantine server must be configured first.
Format
enable jwac redirect
: Enabled
:
: 1.1.1.1/-
: 80 (HTTP)
: Enabled
: Enabled
: Enabled
: 1 Seconds
: Quarantine Server
: http://10.90.90.88/authpage.html
: Disabled
: 30 Seconds
: PAP
: Enabled
: Enabled
335