D-Link DGS-3000 Series Reference Manual page 724

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
dot3OamThresholdEvent
swPktStormOccurred
swPktStormCleared
swPktStormDisablePort
swSafeGuardChgToExhaust
ed
swSafeGuardChgToNormal
swDoSAttackDetected
swIpMacBindingViolationTra
p
swIpMacBindingStopLearnin
gTrap
swIpMacBindingRecoverLear When the IP-MAC Binding trap is enabled, if the
A dot3OamThresholdEvent notification is sent
when a local or remote threshold crossing event
is detected. A local threshold crossing event is
detected by the local entity, while a remote
threshold crossing event is detected by the
reception of an Ethernet OAM Event Notification
OAMPDU that indicates a threshold event. This
notification should not be sent more than once
per second. The OAM entity can be derived from
extracting the ifIndex from the variable bindings.
The objects in the notification correspond to the
values in a row instance in the
dot3OamEventLogTable. The management entity
should periodically check
dot3OamEventLogTable to detect any missed
events.
Binding: 1.dot3OamEventLogTimestamp
2.dot3OamEventLogOui
3.dot3OamEventLogType
4.dot3OamEventLogLocation
5.dot3OamEventLogWindowHi
6.dot3OamEventLogWindowLo
7.dot3OamEventLogThresholdHi
8.dot3OamEventLogThresholdLo
9.dot3OamEventLogValue
10.dot3OamEventLogRunningTotal
11.dot3OamEventLogEventTotal
This trap is sent when a packet storm is detected
by a packet storm mechanism and a shutdown
action is taken.
Binding: 1: swPktStormCtrlPortIndex
The trap is sent when the packet storm is cleared
by the packet storm mechanism.
Binding: 1: swPktStormCtrlPortIndex
The trap is sent when the port is disabled by the
packet storm mechanism.
Binding: 1: swPktStormCtrlPortIndex
This trap indicates System change operation
mode from normal to exhausted.
Binding: 1: swSafeGuardCurrentStatus
This trap indicates System change operation
mode from exhausted to normal.
Binding: 1: swSafeGuardCurrentStatus
This trap is sent when the specific DoS packet is
received and trap is enabled.
Binding: 1: swDoSCtrlType
2: swDoSNotifyVarIpAddr
3: swDoSNotifyVarPortNumber
When the IP-MAC Binding trap is enabled, if
there's a new MAC that violates the pre-defined
port security configuration, a trap will be sent out.
Binding: 1: swIpMacBindingPortIndex
2: swIpMacBindingViolationIP
3: swIpMacBindingViolationMac
When the IP-MAC Binding trap is enabled, if the
specific port changes from a normal state to a
stop_learning state, a trap will be sent out.
Binding: 1: swIpMacBindingPortIndex
720
1.3.6.1.2.1.158.0.1
1.3.6.1.4.1.171.12.25.5.0.1
1.3.6.1.4.1.171.12.25.5.0.2
1.3.6.1.4.1.171.12.25.5.0.3
1.3.6.1.4.1.171.12.19.4.1.0.1
1.3.6.1.4.1.171.12.19.4.1.0.2
1.3.6.1.4.1.171.12.59.4.0.1
1.3.6.1.4.1.171.12.23.5.0.1
1.3.6.1.4.1.171.12.23.5.0.2
1.3.6.1.4.1.171.12.23.5.0.3