D-Link DGS-3000 Series Reference Manual page 658

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
<path_filename 64> | ftp: <string user:password@ipaddr:tcpport/path_filename>] {dest_file
<path_filename 64>}]
Parameters
firmware_fromTFTP - Specifies to download firmware from a TFTP server.
<ipaddr> - (Optional) The IP address of the TFTP server.
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
<domain_name 255> - (Optional) The domain name of the TFTP server.
src_file - (Optional) Specifies the source file path name.
<path_filename 64> - Enter the source file path name here. This name can be up to 64
characters long.
dest_file - (Optional) Specifies the destination file path name.
<pathname 64> - Enter the destination file path name here.
boot_up – (Optional) Specifies to assign the downloaded file as boot-up image.
cfg_fromTFTP – Specifies to download a configuration file from a TFTP server.
<ipaddr> - (Optional) The IP address of the TFTP server.
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
<domain_name 255> - (Optional) The domain name of the TFTP server.
src_file - (Optional) Specifies the source file path name.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
dest_file - (Optional) Specifies the destination file path name.
<pathname 64>- The pathname specifies an absolute pathname on the device file system.
If pathname is not specified, it refers to the boot_up configuration file.
firmware_fromFTP - Specifies to download firmware from a FTP server.
<ipaddr> - (Optional) The IP address of the FTP server.
tcp_port - Specifies the TCP port.
<tcp_port_number1-65535> - Enter a value between 1 and 65535.
src_file - Specifies the source file location.
<path_filename 64> - The pathname specifies the pathname on the FTP server. It can be
a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
ftp: - Specifies the FTP site.
<string user:password@ipaddr:tcpport/path_filename> - Enter the FTP directory.
dest_file - Specifies the destination file path name.
<path_filename 64> - The pathname specifies an absolute pathname on the device file
system. If pathname is not specified, it refers to the boot_up configuration file.
boot_up - (Optional) Specifies to assign the downloaded file as boot-up image.
cfg_fromFTP - Specifies to download a configuration file from a FTP server.
<ipaddr> - The IP address of the FTP server.
tcp_port - (Optional) Specifies the TCP port.
<tcp_port number 1-65535> - Enter a value between 1 and 65535.
src_file - Specifies the source file path name.
<path_filename 64> - The pathname specifies the pathname on the FTP server. It can be
a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
ftp: - Specifies the FTP site.
<string user:password@ipaddr:tcpport/path_filename> - Enter the FTP directory.
dest_file - Specifies the destination file path name.
<path_filename 64> - The pathname specifies an absolute pathname on the device file
system. If pathname is not specified, it refers to the boot_up configuration file.
Restrictions
Only Administrators can issue this command.
654