Show Ssh Authmode; Config Ssh User - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
Example
To configure user authentication method:
DGS-3000-26TC:admin#config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DGS-3000-26TC:admin#
65-4

show ssh authmode

Description
This command is used to show the user authentication method.
Format
show ssh authmode
Parameters
None.
Restrictions
None.
Example
To show user authentication method:
DGS-3000-26TC:admin#show ssh authmode
Command: show ssh authmode
The SSH Authentication Method:
Password : Enabled
Public Key : Enabled
Host-based : Enabled
DGS-3000-26TC:admin#
65-5

config ssh user

Description
This command is used to update user information for SSH configuration.
579