Configuring Isolate-User-Vlan - H3C S7500E Series Operation Manual

Operation Manual – VLAN
H3C S7500E Series Ethernet Switches

2.2 Configuring Isolate-User-VLAN

Configure the isolate-user-vlan through the following steps:
1) Configure the isolate-user-vlan;
2) Configure the secondary VLAN
3) Add ports to the isolate-user-vlan ( note that no port can be a Trunk port) and
ensure that at least one port has the isolate-user-vlan as its default VLAN;
4) Add ports to the secondary VLAN ( note that no port can be a Trunk port) and
ensure that at least one port has the secondary VLAN as its default VLAN;
5) Configure the mapping between the isolate-user-vlan and the secondary VLAN.
Follow these steps to configure an isolate-user-VLAN:
Enter system view
Create a VLAN (or enter VLAN
view)
Configure the VLAN as an
isolate-user-VLAN
Quit to system view
Add ports to the
isolate-user-VLAN
and ensure that at
least one port has
the
isolate-user-VLAN
as its default VLAN
Quit to system view
Create secondary VLANs
Add ports to the
secondary VLAN
and ensure that at
least one port has
the secondary VLAN
as its default VLAN
Quit to system view
Configure the mapping between
the isolate-user-VLAN and the
secondary VLANs
To do...
Access port
Hybrid port
Access port
Hybrid port
2-2
Chapter 2 Isolate-User-VLAN Configuration
Use the command
system-view
vlan vlan-id
isolate-user-vlan
enable
quit
Refer to Configuring an
Access-Port-Based
VLAN
Refer to Configuring a
Hybrid-Port-Based
VLAN
quit
vlan { vlan-id1 [to
vlan-id2 ] | all }
Refer to Configuring an
Access-Port-Based
VLAN
Refer to Configuring a
Hybrid-Port-Based
VLAN
quit
isolate-user-vlan
isolate-user-vlan-id
secondary
secondary-vlan-list
Remarks
—
—
Required
—
Either is required.
—
Required
Required to
choose either
—
Required