H3C S7500E Series Operation Manual page 51

Operation Manual – Login
H3C S7500E Series Ethernet Switches
Set the history command
buffer size
Set the timeout time of the
user interface
Note that if you configure to authenticate the users in the password mode, the
command level available to users logging into a switch depends on both the
authentication-mode password command and the user privilege level level
command, as listed in
Table 3-5 Determine the command level when users logging into switches are
authenticated in the password mode
Authentication
mode
Password
(authentication-
mode
password)
To do...
history-command
max-size value
idle-timeout
[ seconds ]
Table 3-5.
Scenario
User type
VTY users
Chapter 3 Logging in Through Telnet
Use the command...
minutes
Command
The user privilege level level
command not executed
The user privilege level level
command already executed
3-9
Remarks
Optional
The default history
command buffer size is
10. That is, a history
command buffer can store
up to 10 commands by
default.
Optional
The default timeout time
of a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a
interface is terminated if
no operation is performed
in the user interface within
10 minutes.
You can use
idle-timeout 0 command
to disable the timeout
function.
Command
level
Level 0
Determined
by the level
argument
user
the