H3C S7500E Series Operation Manual page 171

Operation Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
<Device> system-view
[Device] interface ethernet 2/0/1
[Device-Ethernet2/0/1] port-isolate enable
[Device-Ethernet2/0/1] quit
[Device] interface ethernet 2/0/2
[Device-Ethernet2/0/2] port-isolate enable
[Device-Ethernet2/0/2] quit
[Device] interface ethernet 2/0/3
[Device-Ethernet2/0/3] port-isolate enable
# Display the information about the isolation group.
<Device> display port-isolate group
Port-isolate group information:
Uplink port support: No
Group ID: 1
Ethernet2/0/1 Ethernet2/0/2 Ethernet2/0/3
2-3
Chapter 2 Port Isolation Configuration