Figure4-4 Connecting the switches
1
2
3
4
Figure4-5 IRF fabric topology
1
4
Configuring basic IRF settings
After you install the IRF member switches, power on the switches, and log in to each IRF member
switch (see H3C S6805 & S6825 & S6850 & S9850 Switch Series Fundamentals Configuration
Guide) to configure their member IDs, member priorities, and IRF port bindings.
Follow these guidelines when you configure the switches:
•
Assign the master switch higher member priority than any other switch.
•
Bind physical ports to IRF port 1 on one switch and to IRF port 2 on the other switch. You
perform IRF port binding before or after connecting IRF physical ports depending on the
software release.
•
Execute the
For more information about configuring basic IRF settings, see H3C S6805 & S6825 & S6850 &
S9850 Switch Series Virtual Technologies Configuration Guide.
2
3
display irf configuration
command to verify the basic IRF settings.
4-26