Telnet Configuration With Authentication Mode Being Scheme - H3C S7500E Series Operation Manual

Operation Manual – Login
H3C S7500E Series Ethernet Switches
[H3C-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[H3C-ui-vty0] idle-timeout 6
3.4 Telnet Configuration with Authentication Mode Being
Scheme
3.4.1 Configuration Procedure
Follow these steps to perform Telnet configuration (with authentication mode being
scheme):
Enter system view
Configure
the
authentic
ation
scheme
Create a local user and
enter local user view
Set the authentication
password for the local
user
Specify
type for VTY users
Quit to system view
To do... Use the command...
system-view
Enter the
default
ISP
domain domain name
domain
view
authentication default
Configure
{
the AAA
hwtacacs-scheme-
scheme to
name [ local ] | local |
be applied
none | radius-scheme
to the
radius-scheme-name
domain
[ local ] }
Quit to
system
quit
view
local-user user-name
password { simple |
cipher } password
the service
service-type
[ level level ]
quit
Chapter 3 Logging in Through Telnet
hwtacacs-scheme
telnet
3-11
Remarks
—
Optional
By default, the local AAA
scheme is applied. If you
specify to apply the local AAA
scheme, you need to perform
the configuration concerning
local user as well.
If you specify to apply an
existing scheme by providing
the
radius-scheme-name
argument, you need to perform
the following configuration as
well:
Perform AAA-RADIUS
configuration on the switch.
(Refer to
AAA-RADIUS-HWTACACS
module for more.)
Configure the user name
and password accordingly
on the AAA server. (Refer to
the user manual of AAA
server.)
No local user exists by default.
Required
Required
—
the