Configuring Snmp Notifications And Context For Spbm - H3C S12500 Series Configuration Manual

1. Disable area authentication for incoming ISIS-SPB topology advertisement packets on the neighbor
devices.
2. Modify the authentication settings on the local end.
3. Modify the authentication settings on the remote end.
4. Enable area authentication for incoming ISIS-SPB topology advertisement packets on the neighbor
devices.
To configure ISIS-SPB area authentication:
Step
1. Enter system view.
2. Enter SPBM view.
3. Set an authentication
method and password.
4. (Optional.) Disable area
authentication for
incoming ISIS-SPB packets.

Configuring SNMP notifications and context for SPBM

To report critical SPBM events to an NMS, enable SNMP notifications for SPBM. For SPBM event
notifications to be sent correctly, you must also configure SNMP as described in Network Management
and Monitoring Configuration Guide.
ISIS-SPB shares the standard IS-IS MIB with IS-IS and other protocols that use IS-IS in the control plane. For
SNMP to correctly identify a protocol's management information in the standard IS-IS MIB, you must
configure a unique context for each of these protocols. If a protocol supports multiple processes, you must
assign a unique context to each process.
The context names must be unique among all the protocols and their processes.
Context is a method introduced to SNMPv3 for multiple instance managements. For SNMPv1/v2c, you
must specify a context name as a community name for protocol identification.
To enable SNMP notifications for SPBM:
Step
1. Enter system view.
2. Enable SNMP
notifications for SPBM.
Command
system-view
spbm
area-authentication-mode
{ md5 | simple } { cipher
cipher-string | plain
plain-string }
area-authentication send-only
Command
system-view
snmp-agent trap enable spbm
[ adjacency-state-change | area-mismatch |
authentication | authentication-type |
b-mac-conflict | buffsize-mismatch |
id-length-mismatch | lsdboverload-state-change
| lsp-parse-error | lsp-size-exceeded |
max-seq-exceeded | maxarea-mismatch |
own-lsp-purge | protocol-support |
rejected-adjacency | skip-sequence-number |
spsource-conflict | version-skew ] *
32
Remarks
N/A
N/A
By default, area authentication is
disabled. No authentication method or
password is configured.
By default, the device authenticates
incoming ISIS-SPB packets if area
authentication is enabled.
Remarks
N/A
By default, SNMP
notifications for SPBM are
enabled. To disable an
SNMP notification for
SPBM, use the undo form
of the command.