Ust-Enable Ust Lens; Wrp-Warp Selection - Christie Mirage SST Technical Reference

Log out the current user:
(UID)
Log in as service using the default password:
(UID "user" "user")
UST–Enable UST Lens
Enables or disables the 0.38:1 UST lens keep-out area.
Commands
Command Description
UST+ENBL? Returns if the UST lens keep-out area is enabled or not. (Read-
only)
UST+ENBL <0 | 1> Enables or disables the UST lens keep-out area. Changing this
control resets the lens to the default home position.
Examples
Use the normal lens keep-out area:
(UST+ENBL 0)
Use the UST lens keep-out area:
(UST+ENBL 1)
WRP–Warp Selection
Controls warping settings.
Commands
Command Description
WRP+KGAN? Returns if gain compensation is enabled or
disabled when 2D keystone is applied.
(Read-only)
WRP+KGAN <value> Enables or disables gain compensation when
2D keystone is applied.
WRP+SLCT?L Retrieves a list of available warp maps.
(Read-only)
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
0 = Uses the normal
lens keep-out area
(Default)
1 = Enables the UST
lens keep-out area
Values
—
0 = Disables gain compensation
1 = Enables gain compensation (Default)
—
62