Table of Contents
Advertisement
Printing from Windows Applications
2.3
Printing from Windows Applications
2.3.1
Basic Printing Task
This section will discuss how to print from Windows applications using a
Microsoft Word document as an example.
If there is paper on the MP tray, the printer always prints from the MP tray
first. To print on the paper in the other paper sources, you must remove
paper from the MP tray.
Note
This section will explain only the minimum task that is required to print
from Windows applications. You can select various options in the printer's
Properties dialog box to customize your print job as explained in section
2.3.2
2.3.2
2.3.2 Setting Custom Paper Size
2.3.2
Setting Custom Paper Size
Setting Custom Paper Size
Setting Custom Paper Size
1
Set the paper of the size specified in the application for the document
into the printer's paper cassette. For details on how to set paper,
refer to the
In the Remote Operation Panel utility, make sure if each paper source has
paper of the proper size. If not, set the appropriate paper into the source
(see section
Note
the output may not be printed correctly.
2
Open the document you want to print. The following example shows
how to print a Word document.
3
Select Print from the File menu of Word. The Print dialog box will appear.
5
4
From the Name drop down list, select the Kyocera Mita FS-1010 KX
printer if it is not selected.
on page
Installation Guide
Installation Guide
Installation Guide
Installation Guide
1.4.4 Paper Size
on page 1-20). If they have different paper,
2-19
2-21
2-21
2-21
2-21
and later.
.
7
4
6
Advertisement
Table of Contents
