Memory Overflow; Paper Jam - Kyocera Mita FS-C5016N Operation Manual

Message
Load Cassette #
†
(A4)/(PLAIN)
Load EF
†
(A5)/(PLAIN)
Load MP Tray
†
(A4)/(PLAIN)
Memory card err
Insert again

Memory overflow

Press GO
MemoryCard err##
Press GO
Missing
duplex drawer

Paper jam

###############
Table 4-3 (Continued)
Corrective Action
The paper cassette matching the paper size and paper type of the print job is
empty. Load paper into the paper cassette as displayed in place of #. Press
the GO key to resume printing.
If you want to print from a different paper source, press the
display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key, Paper
Handling > appears. By pressing the
appears. After setting the correct paper type, press the ENTER key and
printing starts. For details, see
3.10.6 Selecting the Paper Feed Source on page
There is no paper cassette installed in the printer that matches the paper size
and paper type of the print job. Set paper in the envelope feeder. Press the
GO key to resume printing. (Note that feeding the paper having a paper size
which does not match the current paper size from the envelope feeder can
cause paper jam.)
If you want to print from a different paper source, press the
display Use alternative and you can change the source for paper feed-
ing. After selecting a paper source and pressing the MENU key, Paper
Handling > appears. By pressing the
appears. After setting the correct paper type, press the ENTER key and
printing starts. For details, see
3.10.6 Selecting the Paper Feed Source on page
There is no paper cassette installed in the printer that matches the paper size
and paper type of the print job. Set paper in the MP tray. Press the GO key
to resume printing. (Note that feeding the paper having a paper size which
does not match the current paper size from the MP tray can cause paper jam.)
If you want to print from a different paper source, press the
display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key, Paper
Handling > appears. By pressing the
appears. After setting the correct paper type, press the ENTER key and
printing starts. For details, see
3.10.6 Selecting the Paper Feed Source on page
The memory card is accidentally removed from the printer's memory card
slot during reading. If you continue reading the memory card, insert the
same memory card into the slot again. The printer again reads it from the
beginning of the data.
Also see
Insert the same memory
The total amount of data received by the printer exceeds the printer's inter-
nal memory. Try adding more memory. Press the GO key to resume print-
ing. You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after a
preset period of time. For details on Auto Continue, refer to
the Operator Panel, section 3.13.8 Auto Continue Setting on page 3-97
A memory card error has occurred. Look at the error code given in place of
## and refer to Storage Error Codes on page
card error, press the GO key
The duplex drawer is either not installed or incorrectly inserted. Insert the
duplex drawer securely.
A paper jam has occurred. The location of the paper jam is indicated in place
of the #'s. For details, see Section 4.4 Clearing Paper Jams on page
4-9
4.3 Error Messages
key, the paper type settings menu
Chapter 3 Using the Operator Panel, section
3-77.
key, the paper type settings menu
Chapter 3 Using the Operator Panel, section
3-77.
key, the paper type settings menu
Chapter 3 Using the Operator Panel, section
3-77.
card.
4-11. To ignore the memory
or key to
or key to
or key to
Chapter 3 Using
4-12.