D Copying The Call Record Contents Into Call Sign Memory - Icom IC-80AD Instruction Manual

7
DV MODE OPERATION

D Copying the call record contents into call sign memory

This is a way to copy the call record contents ("CALLER,"
"RXRPT1" and "RXRPT2") into call sign memory "UR" and
repeater list "R-L" at the same time or individually.
q Enter RX CAL (RX call sign) mode.
MENU RX CAL
(Push [MENU
• RX call sign screen is displayed.
w Push [ ](2) or [ ](8) to select the desired record chan-
nel.
e Push [ ](5) several times to select the desired call sign
from CALLER, / (CALLER's note), CALLED, RXRPT1 and
RXRPT2.
CALLER : The station call sign that made the call.
/ : 4 character note with call sign that made the call.
CALLED : The station call sign called by the caller.
RXRPT1 : The repeater call sign used by the caller station in the
same zone, or gateway repeater call sign of the down
link repeater when the caller station is in a different
zone.
RXRPT2 : The repeater call sign for down link repeater.
r Push [ ](6) to enter copy select mode.
• Copy select screen is displayed.
52
]), (Push [ ](2)/[ ](8), then push [ ](5).)
t Push [ ](2) or [ ](8) to select the desired call sign to
be copied from "C ALL," "C UR01"–"C UR60," "C R-L" and
"CLEAR."
• "C ALL" selection won't appear when either station call sign
memory or repeater list has no blank channel.
y Push [ ](5) to copy the selected record's contents into the
appropriate call sign memory or repeater lists.
C ALL : Copy the caller call sign in "CALLER" to "UR" (sta-
tion call sign memory) and the repeater call sign
in "RXRPT1" / "RXRPT2" to the repeater lists. This
selection won't appear when either station call sign
memory or repeater list has no blank channel.
C UR01– :
C UR60 : Copy the caller call sign in "CALLER" to "UR" (sta-
tion call sign memory). This selection appears
when entering the copy select mode (step r) from
"CALLER" only.
C R-L : Copy the repeater call sign in "RXRPT1" / "RXRPT2"
to the repeater lists. This selection appears when
entering the copy select mode (step r) from
"RXRPT1" or "RXRPT2" only.
CLEAR : Clear (erase) the selected call record contents.
u Push [MENU
] to return to frequency indication.