Mac Notification - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Port
VLAN ID
MAC Address
Click the Apply button to accept the changes made.
Click the Clear Dynamic by Port button to clear the dynamic MAC address listed on the corresponding
port.
Click the Clear Dynamic by VLAN button to clear the dynamic MAC address listed on the corresponding
VLAN.
Click the Clear Dynamic by MAC button to clear the dynamic MAC address entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic MAC addresses.
Click the View All button to display all the MAC addresses recorded in the MAC address table.

MAC Notification

On this page, users can view and configure MAC notification. To view the following window, click L2
Features > FDB > MAC Notification, as shown below:
The fields that can be configured are described below:
Parameter
MAC Address Notification
Interval
History Size
Select the port that will be used for this configuration here.
Enter the VLAN ID that will be used for this configuration here.
Enter the MAC address that will be used for this configuration here.
Figure 5-6 MAC Notification (MAC Notification Settings) Window
Description
Select to enable or disable MAC notification globally on the switch
Enter the time value between notifications. This value must be
between 1 and 2147483647 seconds. By default, this value is 1
second.
Enter the maximum number of entries listed in the history log used for
notification. This value must be between 0 and 500. By default, this
27