Ipv4 Interface - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
IP Gratuitous ARP State
IP Gratuitous ARP Dad-Reply
State
Gratuitous ARP Learning
State
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.

IPv4 Interface

On this page, users can view and configure the IPv4 interface settings. To view the following window,
click L3 Features > IPv4 Interface, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
After clicking the Edit button, the following page will be available.
Figure 6-5 Gratuitous ARP Window
Description
Select to enable or disable the learning of gratuitous ARP packets in
the ARP cache table.
Select to enable or disable the IP gratuitous ARP Dad-reply state.
Select to enable or disable the gratuitous ARP learning state.
Normally, the system will only learn the ARP reply packet or a normal
ARP request packet that asks for the MAC address that corresponds
to the system's IP address. This option used to enable or disable the
learning of ARP entries in the ARP cache based on the received
gratuitous ARP packet. The gratuitous ARP packet is sent by a source
IP address that is identical to the IP that the packet is queries for.
Figure 6-6 IPv4 Interface Window
Description
Enter the interface's VLAN ID here. This value must be between 1 and
4094.
55