Traffic; Traffic Monitoring By Direction - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Source
Click the Add button to add the newly configured mirror entry based on the information entered.
Click the Delete button to delete an existing mirror entry based on the information entered.
The fields that can be configured for Mirror Session Table are described below:
Parameter
Mirror Session Type
Click the Find button to locate a specific entry based on the information entered.

Traffic

Traffic Monitoring by Direction

On this page, users can monitor traffic, per-port, in a certain direction. The two directions, that can by
selected, are received (RX) or transmitted (TX) packets. After selecting a Port number and then selecting
the Direction option from the drop-down list, click the Apply button to view the page below:
to choose from are Port and Remote VLAN.
After selecting the Port option, select the destination port number from
the second drop-down menu.
After selecting the Remote VLAN option, select the destination port
number from the seconds drop-down menu and enter the VID in the
space provided. The VID must be between 2 and 4094.
Tick the checkbox, next to the Source option, to configure the source
for this port mirror entry.
In the first drop-down menu select the source type option. Options to
choose from are Port, ACL, and Remote VLAN.
After selecting the Port option, select the From Port number and the
To Port number from the second and third drop-down menus. Lastly
select the Frame Type option from the fourth drop-down menu.
Options to choose from as the Frame Type are Both, RX, and TX.
When selecting Both, traffic in both the incoming and outgoing
directions will be mirrored. When selecting RX, traffic in only the
incoming direction will be mirrored. When selecting TX, traffic in only
the outgoing direction will be mirrored.
After selecting the ACL option, enter the ACL profile name in the
space provided.
After selecting the Remote VLAN option, enter the VID in the space
provided. The VID must be between 2 and 4094.
Description
Select the mirror session type of information that will be displayed from
the drop-down menu. Options to choose from are All Session,
Session Number, Remote Session, and Local Session.
After selecting the Session Number option, select the session number
from the second drop-down menu. This number is from 1 to 4.
152