Aggregate Policer - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Aggregate Policer

On this page, users can view and configure the aggregate policer settings. To view the following window,
click QoS > Advanced Settings > Aggregate Policer, as shown below:
The fields that can be configured are described below:
Parameter
Aggregate Policer Name
Average Rate
Normal Burst Size
Maximum Burst Size
Confirm Action
Exceed Action
Figure 7-14 Aggregate Policer (Single Rate Setting) Window
Description
Enter the aggregate policer's name here.
Enter the average rate value here. This value must be between 0 and
10000000 kbps.
Enter the normal burst size value here. This value must be between 0
and 16384 Kbytes.
Enter the maximum burst size value here. This value must be between
0 and 16384 Kbytes.
Select the confirm action here. The confirm action specifies the action
to take on green color packets. If the confirm action is not specified,
the default action is to Transmit. Options to choose from are Drop,
Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-DSCP-1P.
When selecting the Drop option, the packet will be dropped.
When selecting the Set-DSCP-Transmit option, enter the IP DSCP
value in the space provided. This value sets the IP differentiated
services code point (DSCP) value and transmits the packet with the
new IP DSCP value.
When selecting the Set-1P-Transmit option, enter the 1P transmit
value in the space provided. This value sets the 802.1p value and
transmits the packet with the new value.
When selecting the Set-DSCP-1P option, enter the IP DSCP and 1P
transmit values in the spaces provided.
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the exceed action here. The exceed action specifies the action
to take on packets that exceed the rate limit. For a two rate policer, if
the exceed action is not specified, the default action is Drop. Options
to choose from are Drop, Set-DSCP-Transmit, Set-1P-Transmit,
Transmit, and Set-DSCP-1P.
When selecting the Drop option, the packet will be dropped.
When selecting the Set-DSCP-Transmit option, enter the IP DSCP
value in the space provided. This value sets the IP differentiated
services code point (DSCP) value and transmits the packet with the
73