Policy Map - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Color Aware
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Policy Map

On this page, users can view and configure the policy map settings. To view the following window, click
QoS > Advanced Settings > Policy Map, as shown below:
The fields that can be configured for Create/Delete Policy Map are described below:
Parameter
Policy Map Name
Click the Apply button to accept the changes made.
The fields that can be configured for Traffic Policy are described below:
Parameter
Policy Map Name
are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-
DSCP-1P.
When selecting the Drop option, the packet will be dropped.
When selecting the Set-DSCP-Transmit option, enter the IP DSCP
value in the space provided. This value sets the IP differentiated
services code point (DSCP) value and transmits the packet with the
new IP DSCP value.
When selecting the Set-1P-Transmit option, enter the 1P transmit
value in the space provided. This value sets the 802.1p value and
transmits the packet with the new value.
When selecting the Set-DSCP-1P option, enter the IP DSCP and 1P
transmit values in the spaces provided.
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the color aware option here. Options to choose from are None
and Enabled. When color aware is not specified, the policer works in
the color blind mode. When color aware is enabled, the policer works
in the color aware mode.
Figure 7-16 Policy Map Window
Description
Enter the policy map's name here that will be created or deleted. This
name can be up to 32 characters long.
Description
Enter the policy map's name here. This name can be up to 32
76