D-Link DXS-3600 Series Reference Manual page 124

Layer 2/3 managed 10gigabit ethernet switch web ui reference guide
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Destination
Specify Ethernet Type
Ethernet Type
Ethernet Type Mask
CoS
Inner CoS
VID
Inner VID
Time Range
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
To enable the Counter State option or to enter a Remark for the profile, click the Edit button, next to the
specific ACL profile (found in the ACL profile table).
Figure 8-52 Extend MAC ACL (Counter State Enabled) Window
will also be available. Enter the source MAC address and wildcard
value in the spaces provided.
Select and enter the destination information here. Options to choose
from are Any, Host, MAC, and Wildcard. When the Any option is
selected, any destination traffic will be evaluated according to the
conditions of this rule. When the Host option is selected, enter the
destination host's MAC address here. When the MAC option is
selected, the Wildcard option will also be available. Enter the
destination MAC address and wildcard value in the spaces provided.
Select the Ethernet type option here. Options to choose from are aarp,
appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-
console, mop-dump, vines-echo, vines-ip, xns-idp, and arp.
Enter the Ethernet type hexadecimal value here. This value must be
between 0x600 and 0xFFFF. When the Ethernet type profile is
selected, above, the appropriate hexadecimal value will automatically
be entered.
Enter the Ethernet type mask hexadecimal value here. This value must
be between 0x0 and 0xFFFF. When the Ethernet type profile is
selected, above, the appropriate hexadecimal value will automatically
be entered.
Select the CoS value used here. This value is between 0 and 7.
Select the inner CoS value used here. This value is between 0 and 7.
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Enter the inner VLAN ID that will be associated with this ACL rule here.
This value must be between 1 and 4094.
Enter the time profile name that will be associated with this ACL rule,
here.
119

Advertisement

Table of Contents
loading

Table of Contents