Quality Of Service (Qos); Basic Settings; Port Default Cos; Port Scheduler Method - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
7.

Quality of Service (QoS)

Basic Settings

Advanced Settings
Basic Settings

Port Default CoS

On this page, users can view and configure the port's default CoS settings. To view the following window,
click QoS > Basic Settings > Port Default CoS, as shown below:
The fields that can be configured are described below:
Parameter
From Port ~ To Port
Default CoS
Click the Apply button to accept the changes made.

Port Scheduler Method

On this page, users can view and configure the port scheduler method settings. To view the following
window, click QoS > Basic Settings > Port Scheduler Method, as shown below:
Figure 7-1 Port Default CoS Window
Description
Select the range of ports that will be used for this configuration here.
Select the default CoS option for the port(s) specified here. Options to
choose from are 0 to 7. Select the Override option to override the CoS
of the packets. The default CoS will be applied to all incoming packets,
tagged or untagged, received by the port. Select the None option to
specify that the CoS of the packets will be the packet's CoS if the
packets are tagged, and will be the port default CoS if the packet is
untagged.
62