D-Link DXS-3600 Series Reference Manual page 41

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
On this page, more detailed information about the VLAN of the specific interface is displayed.
Click the <<Back button to return to the previous page.
After click the Edit button, the following page will appear. This is a dynamic page that will change when a
different VLAN Mode was selected. When Access was selected as the VLAN Mode, the following page
will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
VLAN ID
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
When Hybrid was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Figure 5-19 VLAN Interface (Access) Window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Enter the VLAN ID used for this configuration here. This value must be
between 1 and 4094.
Figure 5-20 VLAN Interface (Hybrid) Window
Description
Select the VLAN mode option here. Options to choose from are
36