Ipv6 Interface - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Network Address
IP Address
RIP
OSPF
BGP
Connected
Hardware
Click the Find button to locate a specific entry based on the information entered.

IPv6 Interface

On this page, users can view and configure the IPv6 interface's settings.
To view the following window, click L3 Features > IPv6 Interface, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Detail button to view and configure more detailed settings for the IPv6 interface entry.
After clicking the Detail button, the following page will be available.
Description
Enter the IPv4 network address here. In the first space enter the
network prefix and in the second space enter the network mask.
Enter the single IPv4 address here.
Select this option to display only RIP routes.
Select this option to display only OSPF routes.
Select this option to display only BGP routes.
Select this option to display only connected routes.
Select this option to display only hardware routes. Hardware routes are
routes that have been written into the hardware chip.
Figure 6-10 IPv6 Interface Window
Description
Enter the VLAN interface's ID that will be associated with the IPv6
entry.
58