Ipv6 Static/Default Route - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured for Interface are described below:
Parameter
IPv6 State
Click the <<Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
The fields that can be configured for Static IPv6 Address Settings are described below:
Parameter
IPv6 Address
Click the Apply button to accept the changes made.
After selecting the Interface Address tab option, at the top of the page, the following page will be
available.
Click the Delete button to delete the specified entry.

IPv6 Static/Default Route

On this page, users can view and configure the IPv6 static or default routes. To view the following window,
click L3 Features > IPv6 Static/Default Route, as shown below:
Figure 6-11 IPv6 Interface (Detail, IPv6 Interface Settings) Window
Description
Select to enable or disable the IPv6 interface's global state here.
Description
Enter the IPv6 address for this IPv6 interface here. Select the EUI-64
option to configure an IPv6 address on the interface using the EUI-64
interface ID. Select the Link Local option to configure a link-local
address for the IPv6 interface.
Figure 6-12 IPv6 Interface (Detail, Interface Address) Window
59