D-Link DXS-3600 Series Reference Manual page 36

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
GVRP Port
On this page, users can view and configure the GVRP port settings. To view the following window, click
L2 Features > VLAN > GVRP > GVRP Port, as shown below:
The fields that can be configured are described below:
Parameter
From Port ~ To Port
GVRP Status
Join Time
Leave Time
Leave All Time
Click the Apply button to accept the changes made.
GVRP Advertise VLAN
On this page, users can view and configure the GVRP advertised VLAN settings. To view the following
window, click L2 Features > VLAN > GVRP > GVRP Advertise VLAN, as shown below:
Figure 5-12 GVRP Port Window
Description
Select the range of ports that will be used for this configuration here.
Select the enable or disable the GVRP port status. This enables the
port to dynamically become a member of a VLAN. By default, this
option is disabled.
Enter the Join Time value in centiseconds. This value must be
between 10 and 10000 centiseconds. By default, this value is 20
centiseconds.
Enter the Leave Time value in centiseconds. This value must be
between 10 and 10000 centiseconds. By default, this value is 60
centiseconds.
Enter the Leave All Time value in centiseconds. This value must be
between 10 and 10000 centiseconds. By default, this value is 1000
centiseconds.
31