D-Link DXS-3600 Series Reference Manual page 123

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in
the selected ACL profile, as shown below:
The fields that can be configured are described below:
Parameter
Rule Number
Action
Source
Figure 8-50 Extend MAC ACL (Selected) Window
Figure 8-51 Extend MAC ACL (Add Rule) Window
Description
Enter the ACL rule number here. This value must be between 1 and
65535. If this value is not specified, the system will automatically
generate an ACL rule number for this entry.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Select and enter the source information here. Options to choose from
are Any, Host, MAC, and Wildcard. When the Any option is selected,
any source traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the source host's MAC
address here. When the MAC option is selected, the Wildcard option
118