Reboot System - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Select the The Switch will be reset to its factory defaults including IP address and stacking
information, and then will save, reboot option to reset the switch's configuration to its factory default
settings.
Select the The Switch will be reset to its factory defaults except IP address, and then will save,
reboot option to reset the switch's configuration to its factory default settings. This option will exclude the
IP address from being changed.
Select the The Switch will be reset to its factory defaults including IP address option to reset the
switch's configuration to its factory default settings.
Click the Apply button to initiate the factory default reset and reboot the switch.

Reboot System

On this page, users can reboot the switch and alternatively save the configuration before doing so. To
view the following window, click Tools > Reboot System, as shown below:
Figure 11-13 Reboot System Window
When rebooting the switch, any configuration changes that was made during this session, will be lost
unless the Yes option is selected when asked to save the settings.
Click the Reboot button to alternatively save the settings and reboot the switch.
Figure 11-14 Reboot System (Rebooting) Window
162