D-Link DXS-3600 Series Reference Manual page 80

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Aggregate Policer Name
CIR
Confirm Burst
PIR
Peak Burst
Confirm Action
Exceed Action
Violate Action
Description
Enter the aggregate policer's name here.
Enter the Committed Information Rate (CIR) value here. This value
must be between 0 and 10000000 kbps. The committed packet rate is
the first token bucket for the two-rate metering.
Enter the confirm burst value here. This value must be between 0 and
16384 Kbytes. The confirm burst value specifies the burst size for the
first token bucket in kbps.
Enter the Peak information Rate (PIR) value here. This value must be
between 0 and 10000000 kbps. The peak information rate is the
second token bucket for the two-rate metering.
Enter the peak burst value here. This value must be between 0 and
16384 Kbytes. The peak burst value is the burst size for the second
token bucket in kilobytes.
Select the confirm action here. The confirm action specifies the action
to take on green color packets. If the confirm action is not specified,
the default action is to Transmit. Options to choose from are Drop,
Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-DSCP-1P.
When selecting the Drop option, the packet will be dropped.
When selecting the Set-DSCP-Transmit option, enter the IP DSCP
value in the space provided. This value sets the IP differentiated
services code point (DSCP) value and transmits the packet with the
new IP DSCP value.
When selecting the Set-1P-Transmit option, enter the 1P transmit
value in the space provided. This value sets the 802.1p value and
transmits the packet with the new value.
When selecting the Set-DSCP-1P option, enter the IP DSCP and 1P
transmit values in the spaces provided.
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the exceed action here. The exceed action specifies the action
to take on packets that exceed the rate limit. For a two rate policer, if
the exceed action is not specified, the default action is Drop. Options
to choose from are Drop, Set-DSCP-Transmit, Set-1P-Transmit,
Transmit, and Set-DSCP-1P.
When selecting the Drop option, the packet will be dropped.
When selecting the Set-DSCP-Transmit option, enter the IP DSCP
value in the space provided. This value sets the IP differentiated
services code point (DSCP) value and transmits the packet with the
new IP DSCP value.
When selecting the Set-1P-Transmit option, enter the 1P transmit
value in the space provided. This value sets the 802.1p value and
transmits the packet with the new value.
When selecting the Set-DSCP-1P option, enter the IP DSCP and 1P
transmit values in the spaces provided.
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the violate action here. The violate action specifies the action to
take on packets that violate the normal and maximum burst sizes for
singe rate policing. It specifies the action to take for those packets that
did not conform to both CIR and PIR. For a single rate policer, if the
violate action is not specified, it will create a single-rate two-color
policer. For a two-rate policer, if the violation action is not specified, the
default action is equal to the exceed action. Options to choose from
75