D-Link DXS-3600 Series Reference Manual page 119

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The dynamic fields that can be configured are described below:
Parameter
Fragments
Source
Destination
DSCP
Flow Label
Time Range
After selecting the None option as the Protocol Type, the following page and parameters will be
available, as shown below:
Figure 8-44 Extend IPv6 ACL (Add Rule) SCTP Window
Description
Select the Fragments option to include packet fragment filtering.
Select and enter the source information here. Options to choose from
are Any, Host, IPv6, and Prefix Length. When the Any option is
selected, any source traffic will be evaluated according to the
conditions of this rule. When the Host option is selected, enter the
source host's IPv6 address here. When the IPv6 option is selected, the
Prefix Length option will also be available. Enter the source IPv6
address and prefix length value in the spaces provided.
Select and enter the destination information here. Options to choose
from are Any, Host, IPv6, and Prefix Length. When the Any option is
selected, any destination traffic will be evaluated according to the
conditions of this rule. When the Host option is selected, enter the
destination host's IPv6 address here. When the IPv6 option is
selected, the Prefix Length option will also be available. Enter the
destination IPv6 address and prefix length value in the spaces
provided.
Select or enter the DSCP value used here. This value must be
between 0 and 63.
Enter the flow label value here. This value must be between 0 and
1048575.
Enter the time profile name that will be associated with this ACL rule,
here.
114