D-Link DXS-3600 Series Reference Manual page 42

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Acceptable Frame
Ingress Checking
VLAN Precedence
Native VLAN
VLAN ID
Action
Add Mode
Allowed VLAN Range
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
When Trunk was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Native VLAN
VLAN ID
Action
Allowed VLAN Range
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select to enable or disable the ingress checking function.
Select the VLAN precedence option here. Options to choose from are
Mac-based VLAN and Subnet-based VLAN.
Tick this option to enable the native VLAN function.
After ticking the Native VLAN option the following parameter will be
available. Enter the VLAN ID used for this configuration here. This
value must be between 1 and 4094.
Select the action that will be taken here. Options to choose from are
Add, Remove, Tagged, and Untagged.
Select whether to add an Untagged or Tagged parameters.
Enter the allowed VLAN range information here.
Figure 5-21 VLAN Interface (Trunk) Window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
After selecting Trunk as the VLAN Mode the following parameter will
be available. Select to enable or disable the ingress checking function.
Tick this option to enable the native VLAN function. Also select if this
VLAN supports Untagged or Tagged frames.
After ticking the Native VLAN option the following parameter will be
available. Enter the VLAN ID used for this configuration here. This
value must be between 1 and 4094.
Select the action that will be taken here. Options to choose from are
All, Add, Remove, Except, and Replace.
Enter the allowed VLAN range information here.
37