D-Link DXS-3600 Series Reference Manual page 55

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured for L2 Protocol Tunnel Global Settings are described below:
Parameter
CoS for Encapsulated
Packets
Drop Threshold
Click the Apply button to accept the changes made.
After selecting the L2 Protocol Tunnel Port Setting tab option, at the top of the page, the following page
will be available.
Figure 5-36 L2 Protocol Tunnel (L2 Protocol Tunnel Port Setting) Window
The fields that can be configured for L2 Protocol Tunnel Port Setting are described below:
Parameter
From Port ~ To Port
Action
Type
Tunneled Protocol
Protocol MAC
Threshold
Click the Apply button to accept the changes made.
Click the Clear All button to clear all the counter information.
Click the Clear button to clear all the counter information of the specific entry.
Description
Select the CoS value for encapsulated packets here. This value is
between 0 and 7. Tick the Default option to use the default value.
Enter the drop threshold value here. This value must be between 100
and 20000. By default, this value is 0. The tunneling of the Layer 2
protocol packets will consume CPU processing power in
encapsulating, decapsulating, and forwarding of the packet. Use this
option to restrict the CPU processing bandwidth consumed by
specifying a threshold on the number of all Layer 2 protocol packets
that can be processed by the system. When the maximum number of
packets is exceeded, the excessive protocol packets are dropped.
Description
Select the range of ports that will be used for this configuration here.
Select the action that will be taken here. Options to choose from are
Add and Delete.
Select the type option here. Options to choose from are None,
Shutdown, and Drop.
Select the tunneled protocol option here. Options to choose from are
GVRP, STP, Protocol MAC, and All.
After selecting the Protocol MAC option as the Tunneled Protocol,
the following option will be available. Select the protocol MAC option
here. Options to choose from are 01-00-0C-CC-CC-CC and 01-00-0C-
CC-CC-CD.
After selecting the Shutdown or Drop options as the Type, the
following parameter will be available. Enter the threshold value here.
This value must be between 1 and 4096.
50