D-Link DXS-3600 Series Reference Manual page 47

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The field that can be configured for Spanning Tree State is described below:
Parameter
Spanning Tree State
Click the Apply button to accept the changes made.
The fields that can be configured for STP Traps are described below:
Parameter
STP New Root Trap
STP Topology Change Trap
Click the Apply button to accept the changes made.
The fields that can be configured for Spanning Tree Mode are described below:
Parameter
Spanning Tree Mode
Click the Apply button to accept the changes made.
The fields that can be configured for Spanning Tree Priority are described below:
Parameter
Priority
Click the Apply button to accept the changes made.
The fields that can be configured for Spanning Tree Configuration are described below:
Parameter
Spanning Tree Mode
Priority
Bridge Max Age
Bridge Hello Time
Figure 5-27 STP Global Settings Window
Description
Select to enable or disable the STP global state here.
Description
Select to enable or disable the STP new root trap option here.
Select to enable or disable the STP topology change trap option here.
Description
Select the STP mode used here. Options to choose from are MSTP,
RSTP, and STP.
Description
Select the STP priority value here. This value is between 0 and 61440.
By default, this value is 32768. The lower the value, the higher the
priority.
Description
Select the STP mode used here. Options to choose from are MSTP,
RSTP, and STP.
Select the STP priority value here. This value is between 0 and 61440.
By default, this value is 32768. The lower the value, the higher the
priority.
Enter the bridge's maximum age value here. This value must be
between 6 and 40 seconds. By default, this value is 20 seconds. The
maximum age value may be set to ensure that old information does
not endlessly circulate through redundant paths in the network,
preventing the effective propagation of the new information. Set by the
Root Bridge, this value will aid in determining that the switch has
spanning tree configuration values consistent with other devices on the
bridged LAN.
After selecting RSTP/STP as the Spanning Tree Mode, this
parameter will be available. Enter the bridge's hello time value here.
This value must be between 1 and 2 seconds. By default, this value is
42